Newton offers a variety of four post racks that have been designed to cover an array of specifications and applications. They provide a sturdy, protective housing to expensive routers, servers and switches.
The product offering starts with a lightweight aluminum bolt together frame up to a 1250 Lb fully welded steel, zone 4 rated seismic frame.
With the exception of the seismic range, any of these frames can be custom designed with different depths, widths and hole spacing with an order of 10 pieces or more.
click and save for a 4-post product mini info packet of all of the items listed here or go to the product of choice and find out more.
If you have question, please do not hesitate to call our sales department at (919) 575-6426 or submit an email with you question and/or comments.
Seismically tested to GR-63, zone 4 at 1250lbs and 1150lbs respectively.
Can be configured with or without a selection of doors, side panels, fans and uprights.
The open, four post frame configuration is ideal where heat dissipation is a concern on larger routers.
This is an intermediate level four post frame, stronger than a bolt together but not seismic.
This rack offers a good cost effective solution to most applications requiring just a little more than a two post frame.
Order 10 or more for your own custom dimensions and features.
This series has recently been updated to include both aluminum and steel options for a lighter weight four post frame.
Currently, available in 84”height only with 19” or 23” equipment openings. Depths are fixed at 18”, 24” and 30”.
If you have a specific application that you do not see above, give us a call and we will custom design one with an order of 10 pieces or more.
Newton is steadily growing their cable management product lines, we have vertical cable managers for both seismic and non seismic four post frames and several horizontal cable managers for 19” and 23” frames.
Currently available in 3.65” and 6.0” widths, both single and double sided and in either steel or aluminum.