If you have a requirement for 19” rack mounted electronic equipment, avoid the confusion and check out the line up of Newton EIA compliant racks.
Traditional Telecommunication racks only give you a 17.5” aperture between the uprights, newer, EIA compliant equipment will not fit. Although the hole to hole spacing is the same at 18 5/16”, the upright spacing has to be 17.75”.
click and save for an info packet on Newton's EIA compliant Rack info packet that contains of all of the items listed below or go to the product of choice and find out more.
If you have question, please do not hesitate to call our sales department at (919) 575-6426 or submit an email with you question and/or comments.
A unique rack that offers a heavy duty seismic zone 4 rating with an EIA compliant spacing.
Seismically tested to GR-63, zone 4 (using steel weight plates to simulate load) at 875 lbs total weight.
Can be configured as open or closed duct with either a 4” or 6” high base with a variety of depth options.
This rack is a seismic zone 4 rating with an EIA compliant spacing.
Seismically tested to GR-63, zone 4 (using steel weight plates to simulate load) at 500 lbs total weight.
Designed to allow each rail to be individually grounded using plated upright strips.
Can be configured with a 4” or 6” high base.
By utilizing sheet steel and forming it instead of structural steel, we can manufacture these racks a lot more cost effectively that our 004010 and 004011 series of racks.
They are equal from a performance perspective and a lot stronger than aluminum.
NFR racks are currently available for 19” and 23” equipment in both welded and bolt together versions, also available in 23” with WECO 2” spacing.
This series has recently been updated to include both aluminum and steel options for a lighter weight four post frame.
Currently, available in 84”height only with 19” or 23” equipment openings. Depths are fixed at 18”, 24” and 30”.
If you have a specific application that you do not see above, give us a call and we will custom design one with an order of 10 pieces or more.
Note: You will need a separate NFR or NDR style rack to complete this kit.
