past campaigns Cable Management

 

Wall Mounted Racks & Cabinets

Whether it is customer specified or you're running low on mounting options, Newton offers a variety of wall-mounted frames, racks and cabinet designs to cover an array of specifications and applications. The wall mount provides space for additional equipment with out taking up valuable floor space.

From cost effective to the secure strong box, Newton has a solution for your project. Browse the products below to find out more information on Newton wall-mount solutions

If you have question, please do not hesitate to call our sales department at (919) 575-6426 or submit an email with you question and/or comments.

22230901xx

BOLTED WALL MOUNT FRAME (19” EQUIPMENT)

Need an inexpensive, light weight, easy to assemble wall mount frame?

This is it! 19" EIA-Universal Mounting with 12-24 tapped holes, 19RU. Self aligning tabs for easy assembly. Made out of 11ga steel, for rigidity but yet still light weight, under 28lbs. Various depths can be designed for your specific height or depth with a 10pc min order.

iconDetail PDF

2174650445

WALLMOUNT CABINET

Simple design. One set of uprights included. EIA-U spacing 13RU. Uprights can be adjusted front to back. Louvered sides for good side to side air flow. Three 2" holes in the top and bottom for cable entry and exit. Lockable door for security. Constructed with 13ga and 11 ga steel. Standard color - Black.

22"W X 24"H X 17"D.

iconDetail PDF

2224720045

BOLTED WALL MOUNT FRAME (19” EQUIPMENT)

Need a sturdy easy to assemble wall mount frame?

Newton has a solution! 19" EIA-Universal Mounting with 12-24 tapped holes, 19RU. You can mount up to 250lbs in equipment in this one, if you have a wall that can support it. Self aligning tabs for easy assembly. Made out of 11ga steel with a reinforced design yet still under 35lbs.. Various depths can be designed for your specific height or depth with a 10pc min order.

iconDetail PDF

cab

21233500xx

Wall Swing Out kit

Do you need an unequal flange rack that mounts to the floor and wall, that swings out for rear access to the equipment?

This swing out kit can be used with a 19" or 23" Newton Universal unequal flange rack. It can be set off the wall any distance for 12" to 36". Once closed it is secure until you need to swing it out for installation or maintenance It has a spring latch at the top and a stop at the bottom for the wheel.

Note: This kit only works with Newton Universal UFERS

iconDetail PDF

cab

00438000xx

Under cable rack Swing out kit

Do you need an unequal flange rack that mounts to the floor and overhead cable rack, that swings out for rear access to the equipment. It can be used with a 19" or 23" Newton Universal unequal flange rack. It can be set off a wall or any other interference at any distance. Once closed it is secure until you need to swing it out for installation or maintenance. It has a spring latch at the top and a stop at the bottom for the wheel.

Note: This kit only works with Newton Universal UFERS

iconDetail PDF

cab

2224700045

Wall Mount Cabinet

22"W X 24"H X 25"D

Three 3" holes in the bottom of the back section of the cabinet for cabling. Large open cutout in the top of the back half for ease in cabling. Equipment section is 20" deep Rear section for mounting on wall is 5" deep. Lockable door for security. Constructed from13ga and 11 ga steel. One set of 3" deep uprights, EIA wide spacing 18RU. Uprights can be easily adjusted in the equipment section front to back. Masked area for grounding in the back half of the equipment section. Vented sides for good side to side air flow. Plexiglas door. Standard color is Black.

iconDetail PDF

cab

2224710045

Wall Mount Cabinet

22"W X 36"H X 25"D

Three 3" holes in the bottom of the back section of the cabinet for cabling. Large open cutout in the top of the back half for ease in cabling. Equipment section is 20" deep Rear section for mounting on wall is 5" deep. Lockable door for security. Constructed from13ga and 11 ga steel. One set of 3" deep uprights, EIA wide spacing 18RU. Uprights can be easily adjusted in the equipment section front to back. Masked area for grounding in the back half of the equipment section. Vented sides for good side to side air flow. Plexiglas door. Standard color is Black.

iconDetail PDF

cab

22247300xx

19" x 36" wall mount rack

Need a sturdy welded wall mount frame?

This is it! 19" EIA-Wide Mounting with 12-24 tapped holes, 19RU. No assembly needed with this one. take out of the box and mount it on your prepared wall. Made our of 11ga steel with a reinforced design yet still under 30lbs. Various depths can be designed for your specific height or depth with a 10pc min order.

iconDetail PDF